1 Gallon Hillclimb Fuel Tank
Body - 145 mm diamter
Height - 350 mm including cap
Feed - 8 mm
Breather - 8 mm
Concept Racing aluminium fuel tanks are foam filled to help prevent fuel surge and suppress explosions. The fuel filler has an internal diameter of 38mm and has a black knurled screw on cap with a seal. VDO dip tube sender phalanges, dash fittings and roll over valves can be added at extra cost please contact us for details.
NB: The tank photographed has a roll over valve and -6 feed. As standard this tank has 8 mm feed and 8 mm breather instead.
Delivery 5 - 7 days
Water Injection tank 2 Gallon / 9 litres
Height - 420 mm including neck.
Width - 190 mm
Base - 200 mm X 200 mm
Bleed - 6.5 mm OD
Outlet - 6.5 mm OD
Sight gauges - 6.5 mm OD
Constructed from lightweight but strong aluminium, the product gives high performance combined with an all important reduction in weight. Please note this product should not be used to hold methanol.
Delivery 5 - 7 days
Concept Racing fuel tanks are fitted with fuel tank foam as standard for safety and to meet certain race regulations. The foam is designed to help suppress explosions and reduce fuel surge. Suitable for use petrol and diesel.
Foam is priced per gallon. 4.546 litres per UK gallon
NB: We sometimes have boxes of offcuts available. These are cheaper than foam blocks. Please contact us for details.
Stainless steel for fuel tank straps - 30 mm wide.
Sold by the metre.
Tank breather valves:
- allow air in to replace fuel used
- allow air out due to heat expansion or when filling
- shut off to prevent fuel escaping due to splashing or even rolling over.
The body is -6 JIC male, the vent is 8 mm push fit.
VDO Fuel Level Gauge For Dip Tube Type Sender
VDO Dip-Pipe Fuel Level Sensor
5 - Hole Bolt Pattern (54mm PCD)
200mm long -
Fits our 7 Gallon mini tank and VW Splitscreen Bus tank
We sell various lengths of VDO Dip-Pipe Fuel Level Sensor - Please contact us for pricing.
Customers who bought this product also bought: